We have been getting reports of boot errors in Windows, where the following image is displayed:


If you experience this issue, follow these steps to resolve:

  1. Restart your station.
  2. Press the [DEL] key on your keyboard during bootup. This will boot your system into the BIOS.
  3. Use the arrow keys and move over to the Boot tab.
  4. On the Boot tab, arrow down to Boot Option #1, press the Enter key on your keyboard, and change the option to Enabled. Pressing Enter again should save the setting.
  5. Press the [ESC] key, use the arrows and move over to Save & Exit and select the option to save changes and reboot. 
  6. This should allow the system to boot back in to Windows.







Article is closed for comments.

Was this article helpful?

0 out of 0 found this helpful
Powered by Zendesk